Irrigation Solenoid Valve 1″BSP

$19.95

***2 Valves shown for illustration purposes***

Irrigation Solenoid 1″BSP In (Male)  -1″BSP Out (Female) 24VAC 50LPM with Integrated Manifold

This is a Very High Quality 24Vac Solenoid Valve made in Australia.

This Valve is suitable for irrigation of plants and Lawns up to 100LPM and will connect to any Irrigation Controller on the market. The Valve is made from a very tough Glass Filled Nylon and is UV stabilized and so is especially formulated for the tough Australian Conditions.

It is one of the rare irrigation valves on the market that has WaterMark Approval to ATS 5200.030
The valve has a Max operating Pressure of 1250Kpa and will work right down to 50Kpa.

Description

  • Standard piping configurations are made to the inlet of the valve by connecting via the 1″ BSP barrel union assembly. The piping connections to the outlet of the valve are made via a 1″ BSP Female thread connection. This product is designed to meet all requirements enabling it to be connected to a mains water supply provided it meets the Hydraulic Performance Criteria stated in this specification.
  • The amount of flow can be adjust through the inbuilt flow control handle.
  • The valve has an inbuilt manual override function enabling it to be operated without applying electrical current to the solenoid.
  • For best performance especially at low pressure, the valve should be mounted in a horizontal position with the solenoid standing in an upright position.

Ambient Conditions

The valve will operate correctly within the following temperature conditions:

  • Ambient temperature: 2° C to 60°
  • Relative humidity: 0% to 100%
  • Temperature of water: 2° C to 80° C

Functional Requirements

– Standard piping configurations are made to the inlet of the valve by connecting via the 1″ BSP barrel union assembly. The piping connections to the outlet of the valve are made via a 1″ BSP Female thread connection. This product is designed to meet all requirements enabling it to be connected to a mains water supply provided it meets the Hydraulic Performance Criteria stated in this specification.

– The amount of flow can be adjust through the inbuilt flow control handle.

– The valve has an inbuilt manual override function enabling it to be operated without applying electrical current to the solenoid.

– For best performance especially at low pressure, the valve should be mounted in a horizontal position with the solenoid standing in an upright position.

Ambient Conditions

The valve will operate correctly within the following temperature conditions;

Ambient temperature: 2° C to 60°

Relative humidity: 0% to 100%

Temperature of water: 2° C to 80° C

Inlet and Outlet Configurations

  • Inlet
    • 1″ BSP Barrel Union Assembly
  • Outlet
    • 1″ BSP Female thread connection (AS1722)

Markings

The following are clearly visible:

  • The manufactures name
  • Model type number
  • Nominal voltage, frequency and power rating
  • Date of manufacture code
  • Direction of flow arrow

Valve Performance

  • Resistance to bursting pressure
    • Minimum static bursting pressure > 6.5 Mpa (65 bar), reached through a gradual pressure increase spread over 20 seconds starting from atmospheric pressure. .
  • Resistance to external pressure peaks (water hammer peaks)
    • The valve will with stand 100 cycles of 5.0 Mpa transient peaks (peak width of 200ms)
  • Strength of coupling thread
    • With a minimum of 5 full threads engaged, the inlet and outlet coupling threads do not strip or break when subjected to a tightening torque of 50Nm.

Functional Requirements

– Standard piping configurations are made to the inlet of the valve by connecting via the 1″ BSP barrel union assembly. The piping connections to the outlet of the valve are made via a 1″ BSP Female thread connection. This product is designed to meet all requirements enabling it to be connected to a mains water supply provided it meets the Hydraulic Performance Criteria stated in this specification.

– The amount of flow can be adjust through the inbuilt flow control handle.

– The valve has an inbuilt manual override function enabling it to be operated without applying electrical current to the solenoid.

– For best performance especially at low pressure, the valve should be mounted in a horizontal position with the solenoid standing in an upright position.

Ambient Conditions

The valve will operate correctly within the following temperature conditions;

Ambient temperature: 2° C to 60°

Relative humidity: 0% to 100%

Temperature of water: 2° C to 80° C

Inlet and Outlet Configurations

Inlet

1″ BSP Barrel Union Assembly

Outlet

1″ BSP Female thread connection (AS1722)

Markings

The following are clearly visible,

– The manufactures name

– Model type number

– Nominal voltage, frequency and power rating

– Date of manufacture code

– Direction of flow arrow

Valve Performance

Resistance to bursting pressure

Minimum static bursting pressure > 6.5 Mpa (65 bar), reached through a gradual pressure increase spread over 20 seconds starting from atmospheric pressure. .

Resistance to external pressure peaks (water hammer peaks)

The valve will with stand 100 cycles of 5.0 Mpa transient peaks (peak width of 200ms)

Strength of coupling thread

With a minimum of 5 full threads engaged, the inlet and outlet coupling threads do not strip or break when subjected to a tightening torque of 50Nm.

Electrical

Click here for specific electrical information on this product

 

Additional information

Weight .200 kg
Dimensions 10 x 10 x 5 cm

Reviews

There are no reviews yet.

Be the first to review “Irrigation Solenoid Valve 1″BSP”

Your email address will not be published. Required fields are marked *